Hockey Give-and-Go Drill: Pass, Move and Receive Under Control
Updated: 13 hours ago
A hockey give-and-go starts with a controlled pass, a move into a new receiving lane and a return pass timed for the moving player. Begin without a defender. Score the first pass, the supporting movement and the return receive separately, so a completed exchange does not hide a poor angle or a rushed touch.

This is an adaptable coaching method, not a measured ADRIN training result. Use a suitable supervised practice space and the protection required by your coach and venue. Establish ground passing and receiving before adding movement or pressure.
What is different from standing passing practice?
In a stationary pair, the receiver knows roughly where the next pass will go. A give-and-go adds a new problem: after passing, the first player must become available somewhere else. The partner must notice that movement and deliver into a reachable lane.
The useful habit is to move to offer a new option, not simply sprint because the drill says “go.” A quick return to the place the player has already left is not a good exchange. Equally, the moving player should not run so early that the first pass becomes uncontrolled.
Use the ground-passing guide when the stationary pass is the main difficulty. This session adds movement after the pass rather than replacing the foundation.
How do you arrange a simple two-player lane?
Start with a triangle of three flat markers. Player A begins at the first point, player B at the second, and the third identifies the new receiving area. Choose distances that allow comfortable ground pushes and a controlled walking or jogging movement. Around three to five metres between points can be an illustrative trial for competent players, not a universal setup or safety clearance.
The moving route must stay clear of B’s stick and the return-pass line. Check the full swing area, any adjacent activity and where a missed ball could travel. Use one active ball, keep reserves outside the lane and agree a stop signal. Retrieve only after the exchange stops.
Make three unscored exchanges before fixing the markers. If the player has to stretch at full reach or crosses directly in front of the partner, change the shape. The triangle serves the players; the players should not contort themselves to preserve the triangle.
Observation | First adjustment | Keep stable |
No new passing lane | Change movement angle | First-pass distance |
Return behind runner | Review timing and reachable area | Runner route and pace |
Uncontrolled first pass | Return to standing practice | Ball and surface |
Stretched final receive | Widen receiving area | Controlled movement speed |
Reliable three-part exchange | Change one condition | Keep separate scores |
What does one repetition look like?
A checks that B is ready and sends a controlled ground push with the stick’s flat playing face.
Once the pass is under control, A moves toward the third marker to create a new return lane. Start at walking speed if needed.
B looks up, settles the first ball where necessary and returns a ground pass that A can reach without a desperate lunge.
A receives under control in the agreed area. Stop and reset rather than adding an improvised chase.
Complete six exchanges with A moving, then swap roles for six. Pause between sets to discuss one observation.
Change just one condition for the next set: distance, movement speed, receiving area or later defensive pressure.
This version deliberately allows B to control before passing. A one-touch return is a later option, not the entry requirement. A slower successful exchange can be more useful than a fast exchange in which neither player knows why it worked.
How should you score the three parts?
Give one point for a first pass B can control in the agreed area, one for A arriving in a clear reachable return lane and one for a controlled return receive. Agree the observable conditions with the coach before counting. If a feed is disrupted by another player or an unsafe lane, stop and repeat rather than forcing a score.
Illustrative six-exchange record: first pass 5/6, movement 3/6, return receive 2/6. The first pass is relatively reliable under these conditions; timing and receiving deserve attention. Do not collapse the record into 10/18 and describe that as the player’s overall ability.
A second set with 5/6, 5/6 and 4/6 gives a clearer account of this task. The counts are still small. Compare the same conditions over several sessions before treating a better set as a stable change.

What would two different pairs adjust?
Scenario one: a new pair can pass while standing but lose the ball when A accelerates. Keep the first-pass distance, slow A to a walk and widen the receiving area. Let B settle the ball before returning it. The coach watches whether A moves into a new lane rather than crossing B’s path. Do not add a defender yet.
Scenario two: an experienced pair completes the exchange but the return is always behind the runner. Keep the movement route stable and ask B to observe where A can receive next, rather than aiming at A’s starting position. A coach can agree a reachable receiving area and modest pace. Avoid “pass further ahead” as an unlimited instruction: an unreachable ball is not a useful lead pass.
When the pair can explain and repeat the exchange, add a passive defender under the coach’s direction. Defensive pressure changes the decision; it is not just the same task at a higher speed. Keep enough space and supervision for the additional player.
Where does scanning belong?
Both players need information. A checks the new lane before entering it; B checks the runner and any obstruction before returning. A should continue to track the ball rather than look away for a fixed number of seconds.
The two-gate scanning drill isolates looking before a receive. If this give-and-go becomes too complicated, return to that simpler task or the first-touch receiving guide. Simplifying the task preserves a clear learning target.
Which ball should stay in the session?
Keep one permitted model throughout a scored comparison. ADRIN lists its Plain Hockey Ball 160g as smooth PVC and its Dimple Hockey Ball with a dimpled PVC surface. These catalogue properties identify options; they do not establish a measured advantage in your passing lane.
ADRIN Sports, led by CEO and CMO Adarsh, offers both hockey practice models. Choose with the responsible coach for the player, surface and venue, then keep the model unchanged while reviewing movement timing. Changing the ball and the drill together makes scores harder to interpret.

Which common mistakes should you avoid?
A can admire the first pass and remain still, leaving no new option. B can return too early, before the lane exists, or too late, when A has passed it. Another common mistake is treating a stretched interception as a successful controlled receive simply because the ball did not escape.
Do not make the receiving area so small that it rewards reaching. Do not use a stopwatch as the only score. Stop for unexpected lifted balls, discomfort or people entering the lane. The reset is part of the method, not wasted practice time.
What should the coach record?
Write the ball model, surface, marker layout, movement speed, receiving rule and separate three-part counts. Note one observation, such as “return lane opened late,” and one change for the next set. Keep records descriptive rather than assigning a diagnosis from one missed exchange.
Does give-and-go always mean a one-touch pass?
No. For this introductory method, a controlled settle is allowed. One-touch play can be added when the players can manage it without losing the session’s purpose. In a game, the right return depends on the situation, not the name of the drill.
The useful finish
Pass well enough to create time, move to offer a new lane and return to a reachable space. Separate the three parts in your record. That gives a pair one clear adjustment instead of a vague instruction to “play faster.”
EXPIRED — Diwali campaign ended 12 November 2026, 11:59 PM IST. Historical offer details below are no longer active. DIWALI100 — ₹100 off a minimum eligible merchandise subtotal of ₹999 DIWALI500 — ₹500 off a minimum eligible merchandise subtotal of ₹2,700 DIWALI1000 — ₹1,000 off a minimum eligible merchandise subtotal of ₹3,500 Minimums apply to eligible merchandise subtotal, excluding shipping and taxes. Existing automatic offers may affect the qualifying subtotal. One coupon per checkout and one use per customer per code. Valid until 12 November 2026, 11:59 PM IST. |
Authentic hockey-ball references
The catalogue photographs identify the exact models discussed, not a demonstrated training result. Confirm current details and venue suitability before choosing.









Comments