Hockey Scanning Before Receiving: A Two-Gate Decision Drill
Updated: 6 hours ago
Before receiving a hockey pass, look for the next useful space or teammate, then bring your eyes back to the ball in time to control it. Practise that sequence with a slow ground pass and two exit gates. The aim is a better decision, not a dramatic head turn or a fixed number of scans.

What should you look for before the ball arrives?
Start with three questions: Where is the nearest pressure? Which route is open? Where can I send the next pass? In an introductory drill, represent pressure with a closed gate rather than a tackling defender. That lets the player learn to use information without rushing the technical reception.
Scanning and first touch solve different parts of the problem. A player can stop the ball neatly but discover too late that the next route is blocked. Equally, spotting space is not helpful if the player loses sight of the incoming ball. Build both parts together at a manageable speed.
This is an original coaching exercise proposed by ADRIN's editorial team, not a measured training intervention or a promise of faster match decisions. For the reception itself, use our first-touch control guide. England Hockey's Hockey Hub provides further coach-learning resources; this drill is not presented as an endorsed federation session.
How do you set up the two-gate drill?
Use a suitable permitted surface, one coach-approved ball, sticks, four flat markers and a partner. Put two exit gates beyond the receiving position, with enough separation to make the choice clear. Start the feeder a few metres away and adjust distances to the group's control and available space. These are adjustable practice dimensions, not official field markings.
Keep the feed lane, receiving area and both exits clear of other groups. The feeder sends controlled ground passes only. Agree who retrieves stray balls and stop the exercise before anyone crosses the lane. Use the venue's and coach's protection requirements. Do not add a defender until the group can receive and move safely.
What happened? | Likely task to simplify | Next repetition |
Wrong gate, good control | Information or habitual choice | Pause and identify open route |
Right gate, loose touch | Reception or feed difficulty | Slow feed; widen exit |
Late look, missed pass | Timing of attention | Look before feed starts |
Correct choice and control | Stable introductory task | Change one variable |
Unsafe chase or raised feed | Session organisation | Stop and reset clear lane |
What is the repeatable look–receive–choose sequence?
Before the feed, the receiver looks up and identifies the open gate. Initially, the partner indicates the closed gate while the ball is stationary.
The receiver brings attention back to the ball, adopts a comfortable receiving position and signals readiness.
The feeder sends a gentle ground pass. The receiver controls it using the technique agreed with the coach.
The receiver moves through the open gate under control, or plays a controlled ground pass through it if that is the session's chosen task.
Stop, retrieve safely and briefly explain what information changed the choice. Repeat on the other side.
Keep the first version predictable enough for success. Later, the partner can change the signal before starting the feed, so the receiver has to look each time. Do not switch the gate after the player has committed simply to manufacture an error. If information changes too late, reset or accept a safe alternative rather than reward a dangerous scramble.

How can you tell whether the player actually used the look?
Score the decision separately from the ball control. A correct gate with a loose touch needs a technical adjustment. A tidy touch into the closed gate needs a clearer information task. A head turn alone earns no decision point: ask the player what was open and see whether the action fits.
For an illustrative eight-feed block, record the gate choice and controlled exit on each attempt. If six choices are correct but only four exits stay controlled, the scores are 6/8 and 4/8. Those are sample numbers, not ADRIN test results or a benchmark every beginner must meet. Keep the distance, feed and gate width similar for a useful comparison next time.
Avoid timing the first block. A stopwatch can encourage a player to rush before the action is reliable. Introduce a reasonable time constraint only when the coach sees consistent control, and record any change to the exercise so a harder block is not compared directly with an easier one.
Worked example: a beginner keeps watching the feeder
A hypothetical beginner controls seven of eight gentle passes but repeatedly follows the feeder's body rather than checking the gates. The coach pauses before each pass and asks the player to name the available exit. The ball stays still until the player has looked and returned attention to it.
Once that is comfortable, remove the spoken answer but keep the same deliberate sequence. The useful progression is needing less prompting while still choosing appropriately. Narrowing the gates and speeding up the pass at the same time would hide which part caused the next error.
Worked example: a club player always turns the same way
A hypothetical club player automatically exits right, even when the right gate is closed. Keep both gates equally reachable and vary the pre-feed signal. After each attempt, ask what the player noticed before receiving. If the route is blocked, a controlled return to the feeder can be an agreed third option in a later version.
Only then introduce passive pressure with a coach controlling position and intensity. Keep contact and raised-ball challenges out of this beginner exercise. The new question becomes whether the first touch leaves an available next action, rather than whether the player can escape at any cost.

Which ball should you use for this practice?
Choose the model with the coach for the players and surface, and keep it consistent within the comparison. ADRIN lists a smooth Plain Hockey Ball 160g and a dimple practice option. A catalogue photograph identifies their appearance; it cannot prove roll, suitability or approval on your pitch.
ADRIN Sports, led by CEO and CMO Adarsh, offers both plain and dimple hockey practice models. The practical choice is the one assessed for the actual session. If players struggle to locate the moving ball, simplify the background and feed before adding more decision pressure.
What mistakes should coaches avoid?
Do not demand constant looking away while the ball approaches. Give the player time to return attention to the pass. Do not praise an exaggerated head movement when the player cannot describe useful information. Avoid a complicated colour code that tests memory more than awareness; begin with one clear open-or-closed choice.
Keep observers outside the drill and spare balls out of the active lane. Stop if the feed becomes unpredictable. Progress one variable at a time: decision cue, feed speed, space or passive pressure. A harder exercise is worthwhile only when it still teaches the intended action.
Can you practise this alone?
You can rehearse looking up, identifying a target and returning attention to a stationary ball. That is a preparation task, not a substitute for the timing of a real incoming pass. A supervised partner feed provides the changing information that this exercise is designed around.
What belongs on your session checklist?
Confirm a clear surface and protection; agree one receiving technique; show the two choices; start with a gentle feed; record decision and control separately; change one variable; and write down what the player noticed. Finish with a short successful block rather than making the final repetitions the fastest and least controlled.
The takeaway is simple: look for something useful, return to the ball, and let the information shape the next action. Measure that sequence in a repeatable task before asking it to survive match pressure.
EXPIRED — Diwali campaign ended 12 November 2026, 11:59 PM IST. Historical offer details below are no longer active. DIWALI100 — ₹100 off a minimum eligible merchandise subtotal of ₹999 DIWALI500 — ₹500 off ₹2,700 DIWALI1000 — ₹1,000 off ₹3,500 Minimums apply to eligible merchandise subtotal, excluding shipping and taxes. Existing automatic offers may affect the qualifying subtotal. One coupon per checkout and one use per customer per code. Valid until 12 November 2026, 11:59 PM IST. |









Comments