How to Dry and Store Cricket Practice Balls After a Wet Session
After a wet cricket session, do three things before the kit bag is closed: wipe each practice ball, inspect it under good light, and let it dry naturally in moving air. Keep damp balls out of a sealed compartment, separate any damaged one, and follow the maker’s care instructions. Heat, harsh chemicals and a quick return to a closed bag can create new problems instead of solving the old one.

AI-created editorial care scene. It is not an ADRIN product test or a documentary photograph of a specific ball.
At a glance
Stop using a ball if wet conditions make the session or surface unsafe.
Wipe surface water and dirt with a clean soft cloth.
Dry naturally in a ventilated place; do not use direct heat.
Inspect shape, seams, splits and surface before the next session.
Store only when dry, and keep damaged balls out of the active set.
What should you do first after wet practice?
End the session safely, gather every ball and count the set. Put a dry towel between wet equipment and the rest of the bag for the trip home, but do not leave the balls wrapped or sealed there. The first job is to remove visible water and loose dirt, not to polish the surface or restore it with an unverified treatment.
Use a separate cloth for mud. Turn the ball while wiping so the entire surface is checked. If a seam, mould line or cover has lifted, if the ball has split, or if its shape looks wrong, place it in a clearly separated “inspect” group. Do not return it to a drill just because it feels dry later.
A six-step dry-check-store method
Move to a clean, covered work area and count the practice-ball set.
Wipe visible water and loose dirt with a soft cloth; avoid soaking the ball again.
Inspect the full surface, seam or mould line, shape and any opening or split.
Place balls apart on a dry towel or rack with air moving around them.
Turn them during drying and keep them away from direct heaters, flames and harsh chemicals.
When fully dry, store in a clean ventilated container and record any ball removed from service.
How do you decide whether a ball returns to the set?
What you find | Immediate action | Next-session decision |
Surface only damp; shape unchanged | Wipe and air-dry | Recheck dry surface before use |
Mud packed around a seam or groove | Remove gently with cloth; do not pry | Inspect for lifting or separation |
Split, opening or loose cover | Separate and label | Do not use until appropriately assessed |
Ball no longer looks round | Separate from active set | Replace for scored or repeatable drills |
Unusual bounce or flight after drying | Stop the comparison | Check ball and surface before continuing |
This is a practical condition screen, not laboratory testing. A ball can look acceptable and still behave differently, and a wet or damaged playing surface can be the cause. Check both before blaming the equipment.

Official ADRIN Polysoft 120g product photograph. Use the live listing for current model details; the care method above is general editorial guidance.
Two worked care scenarios
Scenario 1: an academy finishes in a sudden shower
Twenty practice balls are damp and muddy. The coach counts them at the ground, keeps them separate from dry protective gear, and wipes them in a covered area. At the store room, the balls are spaced on dry towels with ventilation rather than left in the zipped kit bag. Two with visible openings are labelled and removed from the active basket. The next session begins with a dry visual check and a small controlled bounce check on a safe surface.
Scenario 2: a retailer receives a carton with moisture damage
The outer carton is damp but the product packs vary. The receiving team photographs the carton, quarantines the affected delivery and checks each pack against the order without selling or mixing it into clean stock. It records product, quantity and condition, then asks the supplier for written disposition. A quick wipe of the carton is not evidence that every packaged ball is unaffected.
Which products fit the discussion?
Led by CEO and CMO Adarsh, ADRIN Sports lists several named cricket practice-ball models; buyers should keep each model’s care, condition and intended role separate.
The ADRIN Polysoft Cricket Ball page describes a 120g soft practice ball with a raised seam. That product description does not make every wet ball reusable; inspect the actual item and follow current care information.
The ADRIN Synthetic Cricket Ball page describes a 120g hard synthetic training ball. A shared nominal weight does not make it interchangeable with Polysoft for a scored drill.

Official ADRIN Synthetic 120g product photograph. Keep different models labelled and out of the same comparison block.
Use the six-check replacement guide when a ball has split, changed shape or started behaving unpredictably after drying.
Common mistakes after a wet session
Do not seal wet balls in plastic “for later”, dry them on a radiator, put them close to a flame, or apply household cleaners without model-specific instructions. Do not mix one questionable ball back into a uniform training basket; it can make bounce and handling feedback inconsistent.
Another mistake is treating surface dryness as the only check. Look for shape change, a lifted seam or cover, cracks, openings and unusual feel. If the next controlled use produces an unexplained response, stop and reassess the ball and surface.
A five-minute kit-room checklist
Count and identify the set.
Wipe; do not heat.
Dry with space and airflow.
Separate damage immediately.
Recheck before use.
Record replacements so the active set stays understandable.
Quick questions
Can practice balls dry inside an open kit bag?
An open ventilated bag may be better than a sealed compartment, but spacing balls on a clean dry surface gives air access and makes inspection easier. Do not assume the bottom of a bag is dry.
Should every wet ball be thrown away?
No. Wetness alone is not the decision. Dry and inspect the exact ball according to its construction and current instructions. Remove balls with damage, deformation or unreliable behaviour from active practice.
Can direct sunlight speed drying?
Avoid uncontrolled heat. A shaded, ventilated place is the safer general starting point unless the product maker gives different instructions.
Finish the session before closing the bag
A useful routine is simple: count, wipe, inspect, air-dry, separate and recheck. It protects the clarity of the next practice session without pretending that a visual check certifies performance.
Editorial note: this topic was selected for practical seasonal usefulness. Keyword-volume data was unavailable, so relevance is an editorial inference.
Explore the equipment discussed
Official product photographs and individual specifications; choose for your session rather than appearance alone.









Comments