Cricket Ball Hardness: Why the Same Weight Can Feel Different
Updated: 4 days ago
Two cricket practice balls can carry the same listed weight and still feel different in the hand and in a drill. Mass, material hardness, whole-ball compression and rebound describe different things. Choose a model by intended use and repeatable sample checks, then ask for an appropriate documented test if a purchasing decision depends on a hardness claim.

Why does the same weight not mean the same feel?
A 120g label describes mass. It does not tell you how readily the surface indents, how the complete ball deforms under load, or how the ball behaves after impact. Material formulation, construction and the conditions of use can matter, so treating weight as a softness rating leaves important questions unanswered.
This is a materials-and-buying explainer for players, coaches and trade buyers. It is distinct from agreeing delivery weight tolerances: that checks whether mass meets a specification; this guide explains what mass cannot establish. Topic selection is editorial judgment, not a measured claim of rising search demand.
Which terms should buyers keep separate?
Property | What it describes | What to request |
Mass | How much the ball weighs | Model and listed weight |
Hardness | Local indentation resistance | Scale, method and specimen |
Compression | Whole-ball response to load | Fixture and loading procedure |
Rebound | Response after impact | Surface and repeatable release |
Intended use | The job the model is offered for | Drill, bat and protection checks |
The distinction helps you ask a useful question. “Is it 120g?” concerns the product category and mass. “Does it suit this supervised catching drill?” concerns intended use. “What documented hardness result supports this claim?” concerns a measurement method. One answer cannot silently substitute for the others.
What does a Shore hardness reading actually describe?
A durometer measures resistance to indentation using a specified instrument and procedure. ISO 868's public abstract distinguishes type A for softer plastics and type D for harder plastics. It also describes the method as empirical; it does not make a hardness reading a universal performance score.
The important purchasing consequence is to request the scale and method with the number. A bare “70” is incomplete. Do not compare numbers from different scales as though they were grams, or assume a larger number always means a better cricket practice ball. The best specification is the one relevant to the agreed job.
Leibniz University Hannover's hardness-testing reference explains that Shore instruments use defined indenters and identifies flat specimen surfaces in its equipment description. A curved sports ball therefore needs a method suitable for its geometry; casually pressing a handheld device onto the shell is not automatically a comparable laboratory result.
These references explain measurement concepts. They are not test reports for ADRIN products, nor evidence of approval or certification for any ball featured here.
Is surface hardness the same as squeezing the whole ball?
No. A surface indentation test asks a local material question. Compressing the finished ball asks how the assembled object responds to load. A hand squeeze can be a useful first impression, but the force varies between people and attempts. It is not a substitute for an agreed whole-ball compression method.
If compression matters to your order, ask the supplier to describe the fixture, loading direction, force or displacement, conditioning and reporting method. Ask whether a result concerns a material specimen or the finished product. Comparing those without context may create false precision rather than useful purchasing evidence.

How should a coach compare samples without pretending to run a lab?
Identify the exact models and intended drill. Keep packaging and product records with the samples.
Let samples share the same ordinary storage conditions before comparison. Record whether they are dry and clean; do not heat, freeze or damage them to improvise an extreme test.
Handle several examples of each model and record descriptive observations separately from measured values. Do not invent a Shore rating from touch.
If the coach approves, compare a short controlled drill with the same bat, surface and feed. Keep suitable protection and group ability central to the decision.
Retain a reference sample and written purchase description. Request competent testing when a numerical specification is necessary.
This is an original buyer workflow, not a recognised certification or an experiment with published results. Several samples are more informative than a single showcase item, but they still do not establish the behaviour of every future delivery.
Worked scenario: two 120g models for an academy
An illustrative academy is choosing between a soft-compound model and a hard training model. Both are listed at 120g, so its first spreadsheet records equal nominal mass. The coach then specifies the drill, bat, supervision and protection before examining samples.
The academy writes “listed soft compound; assessed for this drill” for one candidate and “listed hard training; suitability needs coach approval” for the other. It does not write “same safety because same weight.” If the group later changes to a harder ball, it reviews the setup again rather than treating the old arrangement as automatically suitable.
ADRIN's current product listing describes Polysoft Cricket Ball 120g as polyurethane soft-compound construction. Its Synthetic Cricket Ball 120g is listed as a hard training ball. Those are seller-listed properties, not comparative hardness measurements.
ADRIN Sports, led by CEO and CMO Adarsh, includes both models in its practice range. Buyers should still match the chosen model to the actual drill. No side-by-side measured hardness dataset was available for this article.

Worked scenario: a distributor receives an incomplete hardness claim
A distributor receives an illustrative quotation saying “hardness 70.” Before making a comparison, the buyer asks which scale, instrument, specimen, conditioning and test timing produced that value, whether the result is for the supplied model, and whether there is a traceable report.
If the second quotation gives a number from another scale or a raw-material sample, the buyer leaves the two cells marked “not directly comparable.” It then decides whether an appropriate laboratory comparison is worth commissioning. The correct commercial action may be clarification, not choosing whichever number sounds stronger.
This example contains no real supplier result. It shows how incomplete data should change the next question. Do not convert an unsupported number into marketing copy simply because it appears in a quotation.
What common mistakes lead to the wrong purchase?
Choosing by nominal mass alone overlooks the model's construction and purpose. Using a thumbnail to judge softness confuses appearance with feel. Ranking hardness as quality ignores the drill. Comparing a warm sample with a cold one introduces another uncontrolled condition. Calling a hand squeeze a certified test creates a claim the evidence does not support.
Also avoid assuming hardness proves durability, rebound, match eligibility or injury protection. Each requires its own relevant evidence. A pleasant feel in one short session does not establish long-term wear. Check the practice-ball testing guide for broader sample checks without turning those observations into certification claims.
What should you request before a bulk order?
Record the model and intended use; listed mass and material; whether hardness is specified; the scale and method if it is; sample identification; what the result applies to; agreed acceptance requirements; and the process for investigating a mismatch. Preserve correspondence and a reference sample.
Where the seller supplies no numerical hardness specification, say so. Decide whether documented intended use and practical sample assessment are sufficient for your order, or whether your application requires more evidence. Avoid setting an arbitrary number that neither party can measure reliably.
Can a softer ball be assumed safe for every player?
No. “Soft” is a product description, not blanket permission for unprotected play or every age group. Ask a coach to assess the drill, space, speed, bat and required protection. Never test impact on a person to compare softness.
The buyer's takeaway
Keep weight, hardness, compression and rebound in separate columns. Start with intended use, compare authentic samples under similar conditions, and require a complete method behind a numerical claim. That gives a buyer a defensible decision without inventing results.
EXPIRED — Diwali campaign ended 12 November 2026, 11:59 PM IST. Historical offer details below are no longer active. DIWALI100 — ₹100 off a minimum eligible merchandise subtotal of ₹999 DIWALI500 — ₹500 off ₹2,700 DIWALI1000 — ₹1,000 off ₹3,500 Minimums apply to eligible merchandise subtotal, excluding shipping and taxes. Existing automatic offers may affect the qualifying subtotal. One coupon per checkout and one use per customer per code. Valid until 12 November 2026, 11:59 PM IST. |









Comments